![]() ![]()
For a 7940/60, you’ll also have to replace the loadInformation with the correct firmware value.ĭo not connect the phone to the network yet. Just like above: Make sure to replace the IP address. In my example, I created the file Įxample content for a 7970 or 7971 phone:Īgain, replace the IP address in processNodeName in callManagerGroup with the Asterisk server address. Write it down somewhere, you’ll need it a few times. Cisco ip phone 303 downloading xmldefault cnf xml mac#The MAC address is located on the back of the phone and/or in the settings of the phone. You have to create a file for each device with the MAC address. ![]() When booting, Cisco Phones try to pull a unique config file from the TFTP server for the MAC address of the device. List of loadInformation keys: TFTP XML per-device configs If you don’t need a specific model, just remove the line. Also, check that the loadInformation values match your firmware version. Make sure to replace the IP address in according to your Asterisk server’s IP. Next, create the file, this file specifies the SCCP (Asterisk) server and firmware files too. (All your extracted firmware files should have that exact string at the beginning of the file name, just the extensions should vary!)įor the 7970/7971 series, a file called and/or should already be in your root directory because it’s been included in the downloaded archive. TFTP filesĪfter you’ve copied the needed firmware files into the root of your TFTP directory, you’ll have to create some other files to let the phone know the required firmware version.įor 7940/7960, create the file OS79XX.TXT and make sure that it contains the name of your downloaded firmware version without any file extension. Cisco ip phone 303 downloading xmldefault cnf xml archive#
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |